Product Guide - Model I Wired
PRODUCT GUIDE
Model I Wired
Getting Started
Set-Up
What's in the Box?
• 1× Glorious Model I Wired Gaming Mouse
Glorious mice come with blue protective film on the G-Skates mouse feet in order to protect them. Ensure you remove these coverings before use.
Plug & Play
Connect the mouse to an available USB port and the mouse will automatically install all necessary drivers.
System Requirements
• Available USB port
• Windows 7+, MacOS, Linux
Software
Glorious CORE
Instructions for downloading Glorious CORE are available at the link below. CORE is not required to use the mouse, but is needed to unlock a fully customizable experience - unlock the full RGB color palette, create macros, remap mouse buttons, and personalize DPI settings. (Windows OS only)
Mouse Layout
The Model I Wired is an ergonomic mouse with a thumb rest and nine buttons, including a pressable scroll wheel and four side buttons.
Default DPI Levels
The DPI Indicator on the bottom of the mouse will show a color to reflect which DPI level is currently active. Cycle through DPI levels by pressing the DPI Button located behind the scroll wheel.
DPI values, the default DPI level, and the colors used to indicate levels can be customized in Glorious CORE software.
400 DPI
Yellow
800 DPI
Blue
1600 DPI (Default)
Red
3200 DPI
Green
400 DPI
Yellow
800 DPI
Blue
1600 DPI (Default)
Red
3200 DPI
Green
Side Buttons
DPI Focus Button
The DPI Focus button is the larger side button near where your thumb rests on the mouse, below the other three side buttons. Pressing and holding this button will temporarily change the DPI of your mouse. The default DPI Focus is 400 DPI.
This setting can be changed in Glorious CORE under the "Key Binding" tab. This function can also be bound to any other mouse button as desired by using CORE.
Swappable Magnetic Buttons
The Model I has four total buttons on the left side. Two of these buttons are magnetic and removable, allowing you to change their shape to compliment your play style.
The first removable button is the DPI Focus button, located near where your thumb rests below the other three side buttons.
The second removable button is located at the rear of the group of three side buttons.
Removing a Magnetic Side Button
1. There is a small groove at the front of the button. Place your finger or fingernail into this opening.
2. Lightly lift your finger and the button away from the side of the Model I. Since the buttons are magnetic, you will feel a small amount of resistance as you do this.
3. The magnetic button should begin to slowly pull away from the mouse and lift from the slot. Do this slowly and carefully to ensure that the button does not fly out of your hand and get lost.
Installing a Magnetic Side Button
1. Select your preferred mouse button shape from the three provided options.
2. Looking at the button interior, you will notice two posts that help it attach to its respective magnetic slot. The first post is flat & horizontal. The second is circular with a hole in the middle. Line up these posts with the matching holes in the empty button slot.
3. Insert the round post into the rear of the slot before inserting the front, horizontal post.
4. Once aligned, the magnets should pick up the replaceable button and snap it securely into place.
Lighting Effects
The Model I Wired has built-in LED effects that can be changed using the button combinations below. More RGB options are available in Glorious CORE.
Button Combinations
Change Lighting Effect
Next
Middle + Button 4 + DPI+
Previous
Middle + Button 4 + DPI-
Adjust Brightness
Middle + DPI+ + Right Mouse Button
Adjust Speed
Middle + DPI+ + Button 5
Change Color
Middle + DPI+ + Left Mouse Button
Change Lighting Effect
Next
Middle + Button 4 + DPI+
Previous
Middle + Button 4 + DPI-
Adjust Brightness
Middle + DPI+ + Right Mouse Button
Adjust Speed
Middle + DPI+ + Button 5
Change Color
Middle + DPI+ + Left Mouse Button
Lighting Effects
Glorious Mode (Default)
4 Brightness Levels;
3 Speeds
Seamless Breathing (RGB)
4 Brightness Levels;
3 Speeds
Breathing (RGB)
4 Brightness Levels;
3 Speeds
Single Color
4 Brightness Levels;
No Speed;
7 Colors
Breathing (Single Color)
4 Brightness Levels;
3 Speeds;
7 Colors
Tail
4 Brightness Levels;
3 Speeds
Rave
4 Brightness Levels;
3 Speeds
Wave
4 Brightness Levels;
3 Speeds
LEDs Off
(LEDs Turn Off)
Glorious Mode (Default)
4 Brightness Levels;
3 Speeds
Seamless Breathing (RGB)
4 Brightness Levels;
3 Speeds
Breathing (RGB)
4 Brightness Levels;
3 Speeds
Single Color
4 Brightness Levels;
No Speed;
7 Colors
Breathing (Single Color)
4 Brightness Levels;
3 Speeds;
7 Colors
Tail
4 Brightness Levels;
3 Speeds
Rave
4 Brightness Levels;
3 Speeds
Wave
4 Brightness Levels;
3 Speeds
LEDs Off
(LEDs Turn Off)
Product Specs
Model I Wired (V1)
Weight
69g ± 2.5g
Sensor
Glorious BAMF Sensor
Switch Type (Main Buttons)
Glorious Mechanical Rated for 80 Million Clicks
Number of Buttons
9
Max Tracking Speed
400 IPS
Acceleration
50G
Max DPI
19,000
Max Polling Rate
1000Hz (1ms) (Default)
Lift Off Distance
1-2 mm (Adjustable with Software)
1 mm Default
Debounce Time
4-16 ms (Adjustable with Software)
10 ms Default
Connection
USB 2.0
Weight
69g ± 2.5g
Sensor
Glorious BAMF Sensor
Switch Type (Main Buttons)
Glorious Mechanical Rated for 80 Million Clicks
Number of Buttons
9
Max Tracking Speed
400 IPS
Acceleration
50G
Max DPI
19,000
Max Polling Rate
1000Hz (1ms) (Default)
Lift Off Distance
1-2 mm (Adjustable with Software)
1 mm Default
Debounce Time
4-16 ms (Adjustable with Software)
10 ms Default
Connection
USB 2.0
Reset to Factory Default
The Model I Wired can be restored to factory settings by pressing and holding the left, right, and scroll click buttons for 5 seconds. The LEDs will flash green to indicate that the settings are being reset.
This action will erase all custom profile information from the mouse.
Additional Links
Support
Questions or concerns regarding your Glorious mouse can be directed to our support team.
Warranty
Important Notices
• 2-year limited manufacturer warranty
• Warranty does not cover damages resulting from opening the mouse.
• Keep out of reach of children below the age of 10.
Product Registration
Registering your product extends the warranty by an additional year (free of charge) on eligible devices. To be eligible, register your device within 365 days of date of purchase.