Product Guide PRO Mice 1KHz

PRODUCT GUIDE

PRO Mice 1KHz

Getting Started

Set-Up

What's in the Box?

• 1× Glorious PRO Gaming Mouse

• 1× USB-A to USB-C Ascended Charging Cable

• 1× 2.4GHz Wireless Receiver USB

• 1× USB-A to USB-C Adapter

Glorious mice come with blue protective film on the G-Skates mouse feet in order to protect them. Ensure you remove these coverings before use.

Plug & Play

We recommend fully charging your mouse before using it for the first time in wireless mode. The mouse can be used normally in wired mode. Total charge time from zero to full battery is approximately 3 hours.

Plug the USB-A end of the Ascended cord into your PC and the USB-C end into the USB-C port located on the front of the mouse. The mouse will automatically install all necessary drivers.

Wireless USB Receiver

Once the mouse is fully charged, plug the USB Receiver into any available USB port on your PC. It is paired with the mouse out of the box and should be kept at close range for optimal performance.

The PRO Series 1KHz mouse is set to a 1,000Hz polling rate by default.

System Requirements

• Available USB port

• Windows 7+, MacOS, Linux

Software

Glorious CORE

Instructions for downloading Glorious CORE are available at the link below. Downloading CORE is recommended in order to update your mouse’s firmware and achieve the best possible experience.

This software is not required to use the mouse, but is needed to unlock a fully customizable experience - create custom macros, rebind mouse functions, unlock the full RGB color palette, and save personalized DPI settings. (Windows OS only)

Forward navigation arrow

Glorious CORE Download

Mouse Layout

The PRO mice have six buttons, including a pressable scroll wheel and two side buttons.

Model O 2 PRO 1KHz mouse top and left side views with buttons labelled

Default DPI Levels

The DPI Indicator on the bottom of the mouse will show a color to reflect which DPI level is currently active. Cycle through DPI levels by pressing the DPI Button located behind the scroll wheel.

DPI values, the default DPI level, and the colors used to indicate levels can be customized in Glorious CORE software

400 DPI

Yellow

800 DPI

Blue

1600 DPI (Default)

Red

3200 DPI

Green

Battery

When the PRO mouse is low on power (below 7% battery), the LED indicator below the DPI button will blink red.

The battery level can be checked in wireless mode by pressing and holding the DPI button. The LED indicator will blink in the color corresponding to the battery level. This can be disabled by pressing and holding the DPI button again. Battery level can also be found in the Glorious CORE software.

0-25% Battery

Red LEDs

26-60% Battery

Orange LEDs

61-90% Battery

Yellow LEDs

91-100% Battery

Green LEDs

Product Specs

PRO Mice 1KHz

Weight

Model O 2 PRO: 57g
Model D 2 PRO: 60g

Sensor

Glorious BAMF 2.0 Optical Sensor

Switch Type (Main Buttons)

Glorious Optical Switches Rated for 100 Million Clicks

Number of Buttons

6

Max Tracking Speed

650 IPS

Acceleration

50G

Max DPI

26,000

Max Polling Rate

1000Hz (1ms) (Default)

Lift Off Distance

1-2 mm (Adjustable with Software)

1 mm Default

Debounce Time

4-16 ms (Adjustable with Software)

10 ms Default

Connection

USB 2.0;

2.4GHz Wireless

Battery Life

80 Hours (at 1000Hz Polling Rate)

Reset to Factory Default

The PRO mice can be restored to factory settings by pressing and holding the left, right, and scroll click buttons for 5 seconds. The LED indicator under the DPI button will flash green to indicate that the settings are being reset.

This action will erase all custom profile information from the mouse.

Additional Links

Support

Questions or concerns regarding your Glorious mouse can be directed to our support team.

Forward navigation arrow

Support

Warranty

Important Notices

• 2-year limited manufacturer warranty

• Warranty does not cover damages resulting from opening the mouse.

• Keep out of reach of children below the age of 10.

Forward navigation arrow

View Full Warranty Info

Product Registration

Registering your product extends the warranty by an additional year (free of charge) on eligible devices. To be eligible, register your device within 365 days of date of purchase.

Forward navigation arrow

Register Your Product